Stationary Concrete Batching Plant

Product Details:

Model NE-50 is a fully automatic, Concrete Batching Plant with gravel & sand hoppers on single chassis in line with charging conveyor and Twin Shaft Mixer structure.

The plant comprises of adequate capacity gravel & sand hoppers, weighing conveyor suspended on electronic load cells, Twin Shaft type mixer unit, cement weigh batcher with screw conveyor, Rubber belt type charging conveyor, PLC based control panel.

 

Model NE-50 (50 M3 / HR.)

Construction Features:

• Modular construction provides easy accessibility for maintenance
• Heavy duty robust chassis fabricated from structural steel.
• Easy to erect with minimum foundation / civil work.
• Short cycle time and high uniform concrete quality.
• Parallel dosing of aggregates / sand, water and cement reduces the cycle time.
• Cement silo in above picture is not a part of supply by us.

Component Features:

• Four nos. hoppers for storage of gravels & sand. Each hopper storage capacity is 7 m3 and is fitted with pneumatically operated gates. Integral weighing conveyor is suspended on 4 nos. electronic load cells for weighing of gravel & sand. Bin vibratory motor is fitted on one hopper meant for sand.
• Rubber belt type charging conveyor transfers the weighed gravels (aggregates) and sand from the weighing conveyor beneath the hoppers to the Twin Shaft Mixer unit.
• Twin Shaft Mixer unit of 1 m3 capacity constructed from heavy duty steel is having 10 mm thick wear resistant replaceable liner plate and spring loaded paddle mixer arms with replaceable blades. Hydraulically operated gate facilitates the discharge of concrete mix from bottom of Twin Shaft Mixer on to the transit mixer or concrete pump. The drive to the mixing arm is through planetary Gear Box coupled with motor.
• Submersible type water pump and suitable piping supplies the water from storage tank to mix. PLC controls the quantity of water required for each cycle / batch. Parallel dosing of water & gravel (aggregates) reduces cycle time & Twin Shaft Mixer abrasion.


• Separate weighing arrangement with electronic load cells for cement parallel to gravel & sand weighing reducing the cycle time thus increasing the concrete mix output.



• PLC based control panel with feather touch buttons is capable of storing 50 different recipes. All electrical components are of Schneider / siemens make. Insulated operator cabin of 5' x 7' size is provided for housing the control panel and operating the plant.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Mundra,Ahmedabad
• Production Capacity: 8 Plant
• Delivery Time: 15 Days
• Packaging Details: Standard

Product Details:

Model NE-20 is a fully automatic, compact Concrete Batching Plant with gravel & sand hoppers on single chassis with two nos. wheel axles & separate frame for Twin Shaft Mixer. The towing arrangement in the plant facilitates it to be towed by tractor or equivalent power.

The plant comprises of adequate capacity gravel & sand hoppers, weighing conveyor suspended on electronic load cells, Twin Shaft mixer unit, additive tank, cement silo with screw conveyor, Rubber belt type charging conveyor, PLC based control panel.

Construction Features:

• Compact, easy mobility with tractor or similar power.
• Modular construction provides easy accessibility for maintenance.
• Heavy duty robust chassis fabricated from structural steel.
• Easy to erect since no foundation / civil work.
• Short cycle time and high uniform concrete quality.
• Parallel dosing of aggregates / sand, water and cement reduces the cycle time.

Component Features:

• 2 nos. hoppers for storage of gravels & sand. Each hopper storage capacity is .4 m3 and is fitted with pneumatically operated gates. Integral weighing conveyor is suspended on 4 nos. electronic load cells for weighing of gravel & sand. Bin vibratory motor is fitted on one hopper meant for sand.
  
  v Rubber belt type charging conveyor transfers the weighed gravels (aggregates) and sand from the weighing conveyor beneath the hoppers to the Twin Shaft Mixer unit.
• Twin Shaft Mixer it of 0.4 m3 capacity constructed from heavy duty steel is having 10 mm thick wear resistant replaceable liner plate and spring loaded paddle mixer arms with replaceable blades. Hydraulically operated gate facilitates the discharge of concrete mix from bottom of Twin Shaft Mixer on to the transit mixer or concrete pump. The drive to the mixing arm is through planetary Gear Box coupled with motor.
• Submersible type water pump and suitable piping supplies the water from storage tank to mix. PLC controls the quantity of water required for each cycle / batch. Parallel dosing of water & gravel (aggregates) reduces cycle time & Twin Shaft Mixer abrasion.
• Cement Silo of 1.5 tons storage capacity with cement weigher having independent load cell for weighing. Cement Silo is mounted on in feed charging conveyor frame. Cement is transferred to cement weigher by Screw Conveyor.
• Separate weighing arrangement with electronic load cells for cement parallel to gravel & sand weighing reducing the cycle time thus increasing the concrete mix output.
• PLC based control panel with feather touch buttons is capable of storing 50 different recipes. All electrical components are of Schneider / Siemens make. Insulated operator cabin of 5' x 7' size is provided for housing the control panel and operating the plant.

Additional Information:

• Item Code: NE-203
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Mundra ,Ahmedabad
• Production Capacity: 10 Plant
• Delivery Time: 15 Days
• Packaging Details: Standard

Product Details:

Stationary Concrete Batching Plant The plant comprises of adequate capacity gravel & sand hoppers, weighing conveyor suspended on electronic load cells, Pan type mixer unit, additive tank. cement silo with screw conveyor, Rubber belt type charging conveyor, PLC based control panel.

Salient Features:Fully automatic plant with mix material output capacity of 30 m3/hr.Easy mobility (Two Chassis); can be towed by tractor or similar power.Easy to erect since no foundation / civil work.Short cycle time and high uniform concrete quality.Two nos. twin hoppers i.e. total 4 nos. hoppers (2 x 2) for storage of gravels & sand.Each hopper storage capacity is 2.5 m3 and is fitted with pneumatically operated gates.Integral weighing conveyor is suspended on 4 nos. electronic load cells for weighing of gravel & sand. Vibratory motor is fitted on one hopper meant for sand.Rubber belt type charging conveyor transfers the weighed gravels (aggregates) and sand from the weighing conveyor beneath the hoppers to the Pan Mixer unit.Pan type Mixer unit of 0.75 m3 capacity fabricated from heavy duty steel is having 10 mm thick wear resistant replaceable liner plate.Spring loaded paddle mixer arms with replaceable blades.The mixing arms driven by Imported Planetary Gear Box coupled with 30 HP motor.Inbuilt Additive tank with self priming pump.Cement Silo of 1.5 tons storage capacity with screw conveyor for transferring the cement to Pan Mixer unit

Product Details:

Model NE-45 is a fully automatic, compact Concrete Batching Plant with gravel & sand hoppers on single chassis with two nos. wheel axles & separate frame for Pan Mixer. The towing arrangement in the plant facilitates it to be towed by tractor or equivalent power.

The plant comprises of adequate capacity gravel & sand hoppers, weighing conveyor suspended on electronic load cells, Pan type mixer unit, additive tank, cement silo with screw conveyor, Rubber belt type charging conveyor, PLC based control panel.

 

Construction Features:

• Compact, easy mobility with tractor or similar power.
• Modular construction provides easy accessibility for maintenance
• Heavy duty robust chassis fabricated from structural steel.
• Easy to erect since no foundation / civil work.
• Short cycle time and high uniform concrete quality.
• Parallel dosing of aggregates / sand, water and cement reduces the cycle time.

Component Features:

• 4 nos. hoppers for storage of gravels & sand. Each hopper storage capacity is 6 m³ and is fitted with pneumatically operated gates. Integral weighing conveyor is suspended on 4 nos. electronic load cells for weighing of gravel & sand. Bin vibratory motor is fitted on one hopper meant for sand.
• Rubber belt type charging conveyor transfers the weighed gravels (aggregates) and sand from the weighing conveyor beneath the hoppers to the Pan Mixer unit.


• Pan type Mixer unit of 0.75 m³ capacity constructed from heavy duty steel is having 10 mm thick wear resistant replaceable liner plate and spring loaded paddle mixer arms with replaceable blades. Hydraulically operated gate facilitates the discharge of concrete mix from bottom of Pan Mixer on to the transit mixer or concrete pump. The drive to the mixing arm is through planetary Gear Box coupled with motor.


• Submersible type water pump and suitable piping supplies the water from storage tank to mix. PLC controls the quantity of water required for each cycle / batch. Parallel dosing of water & gravel (aggregates) reduces cycle time & Pan Mixer abrasion.


• Cement Silo of 1.5 tons storage capacity with cement weigher having independent load cell for weighing. Cement Silo is mounted on in feed charging conveyor frame. Cement is transferred to cement weigher by Screw Conveyor.


• Separate weighing arrangement with electronic load cells for cement parallel to gravel & sand weighing reducing the cycle time thus increasing the concrete mix output.
• PLC based control panel with feather touch buttons is capable of storing 50 different recipes. All electrical components are of Schneider / Siemens make. Insulated operator cabin of 5' x 7' size is provided for housing the control panel and operating the plant.

Product Details:

Manufacturer & Exporter of Mobile Concrete Batching Plant 18 Cu M per Hrs. Our product range also comprises of Reversible Concrete Mixer Machine and Mobile Concrete Batching Plant 30 Cu M per Hrs.

Product Details:

Model NE-25 is a fully automatic, compact Stationary Concrete Batching Plant on single chassis with two nos. rear axle & one no. swiveling front axle. The towing arrangement in the plant facilitates it to be towed by tractor or equivalent power.

The plant comprises of adequate capacity gravel & sand hoppers with conveyors, Pan type mixer unit, electronic load cells, water tank, cement silo with screw conveyor, Rubber belt type discharge conveyor, PLC based control panel and three axles fitted with pneumatic rubber tyres.

Salient Features:

• Fully automatic plant with mix material output capacity of 25 m³/hr.
• Easy mobility (Single Chassis); can be towed by tractor or similar power.
• Easy to erect since no foundation / civil work.
• Short cycle time and high uniform concrete quality.
• Two nos. twin hoppers i.e. total 4 nos. hoppers (2 x 2) for storage of gravels & sand.
• Each hopper storage capacity is 2.5 m³ ( Total storage capacity 10 m³ )
• Vibratory motor is fitted on one hopper meant for sand.
• Pan type Mixer unit of 0.75 m³ capacity fabricated from heavy duty steel is having 10 mm thick wear resistant replaceable liner plate.
• Spring loaded paddle mixer arms with replaceable blades.
• The mixing arms driven by Imported Planetary Gear Box coupled with 30 HP motor.
• The Pan Mixer is suspended on three nos. electronic load cells.
• Inbuilt water tank of 1000 ltrs. storage capacity with submersible pump.
• Inbuilt Additive tank with self priming pump.
• Cement Silo of 1.5 tons storage capacity with screw conveyor for transferring the cement to Pan Mixer unit.
• Rubber belt type discharge conveyor transfers the concrete mix output from Pan Mixer to transit mixer or concrete pump.
• PLC based control panel capable of storing 50 different recipes.
• Total connected Electric load 61.5 H.P.

Product Details:

We are a paramount organization that is engaged in manufacturing and supplying a broad spectrum of RMC Concrete Batching Plants. Manufactured using optimum-grade material and components; these products are capable of delivering precise mixture results. Available in different capacities and specifications, our product-line is applicable in used in construction industries.